Synonyms
Garrulous-talktive
Candid-outspoken
Equanimity-composure
Broucher-oppening
Chimerical-fantastic
Prodivity-
Regal-royal
Antonyms
Protract-shorten
Tenacious-
Credit-
Precipitious-
Admonish-
Repudiate-accept
Quixotic-
Invoice-
Sentence completion
It was on fungus-chlorophyll from Barrons 13 edition
Passage from Barrons, it is on some characters from chatholics church .search from barrons
Apt same as others papers
Critical reasoning from barrons 13 edition and its more than enough and go through all
1 red and brown related to marriage
2 toll gate problem between cities
3 persons speaking different languages and their possible arrangement like those speaking spanish and French etc.
Y series
Synonyms
Brakish-
Clift-split
Notrotic-having unfortunate
Interemirayte-
Interpied-courages
Tawdry
Intervene
Intricit
Hamper
Assuage
Haplace-unfortunate
Antonyms
Tractable-
Urban
Disin
Complus
Precipitate
Critical reasoning
1 red and brown
2 all a,s b,s ...........are q,s
3 tamil,hindi ,telugu lang based
Z series
Synonyms
Equanimity-
Misrange
Incontinent-
Contradictory
Mirage
Interdict
Assuage
Revile
Cibide
Critical
Meausem prob
Tamil,Malayalam,orriya ..
Red brown
Don,t put everything k there is upper cut off
Put max 65-67 out of 82
Thursday, August 20, 2009
TCS PAPER - 11 JUN 2006 - COIMBATORE
TCS Test PAPER ON 01 AUG 2006 AT BELLARY, KARNATAKA
First we had on line test. A total of 160 students from both B.E and M.C.A appeared for it. They divided us into two batches of 90 and 70 and conducted the test for the two one after other.
They said they may conduct GD depending upon number of students passing online test.
The test had 3 sections. Verbal ability in which 10 questions were synonyms, 10 were Antonyms, 5 questions for Passage and 5 sentence completion. The time for this was 20 minutes. I knew answer for only one questions in this. Aptitude session appeared immediately after 20 minutes. This session had 35 questions, almost all questions were from previous tests conducted in Ranchi, Coimbatore… The questions were fully basic. I have practiced R.S. Agarval book much but didn’t get any questions from it. This session was for 30 minutes. The third session was Critical Reasoning in which two questions, each contained 8 and 4 questions, respectively. I was unable to answer first question, but second was easy.
Those who were selected for 2nd round had all got Psychometric session after the Critical Reasoning, but the officers said not to answer the questions. Those who didn’t get Psychometric session were not called. I think who scored well only got that.
Their target was to select 50 but 41 crossed 1st round. So they combined Technical and HR rounds. On 1st day only 11 students were interviewed. The rest were said to come on the next day.
VERBAL SESSION:
All questions were from Barron’s GRE book. One of my friend remembered 800 words but got none of them. So I suggest to remember words based on Prefix, Root and Suffix method.
APTITUDE SESSION:
Bit operation…
A: 10011010
B: 11011011
C: 01011010
Find (AUB)nC
Find the odd one out: Three were DBMSs and one was OS
Find the odd one out: I can’t recall the question.
5 questions were based on Data Interpretation. The question was something related to number of members in a club in 5 successive years. One of the questions was to calculate %age rise in members between three years. Better refer Data Interpretation part in R.S. Agarwal book.
What is the largest prime number stored in 6 bits.
Convert some number in Hexadecimal to Decimal
Given g(0)=1, g(1)=-1 and g(n)=g(n-1)+g(n-2), find g(6).
Question based on coding a word.
5, 8, 14, x, 35, 50… Find x. Answer: 23
Question base on program size and memory occupied. Find %age change when size of program is changed.
In Chennai, temperature at noon varies by (T^2)/6 + 12T + 12 where T is the time elapsed from noon. Find %age change in temperature between 3PM and 6PM
A 2D array is declared as A[9, 7], each element occupies 4 bytes. The array starts at the location 3000. Find the location of A[8, 5]
Three questions based on Venn diagram, related to Football, Tennis and Cricket players.
Recognize equation of a given curve.
What is the number of Vertices, Edges and Faces of a cube.
Question related to work and time.
Find the value of M(363, 5)+R(3.4)+T(7.8)-R(3.8) where M is modulus, R is round-off, T is truncate. Answer: 9
Question related to data transmission time.
Which are orthogonal pairs?
If A, B, C are the mechanisms used to reduce fuel consumption rate by 25%, 20% and 10% respectively. Find the total fuel economy if they were used individually.
Set of values for X, Y were given and asked to find the equation.
# represents double and $ represents change in sign. Find the value of some expression
Which is the power of 4? 1024, 4048. … Answer: 4048 (All options were divisible by 4 but only 4048 is a power of 4)
Question on flight takes off at some place given by the latitude and longitude at 1AM and lands on some other location after 13 hours. Find the time at destination.
A power unit is there by the bank of the river of 900 meters width. A cable is made from power unit to Power a plant opposite to that of the river and 3000mts away from the power unit. The cost of the cable below water is Rs.15/- per meter and cost of cable on the bank is Rs.5/- per meter. Find the length where the cable is to be cut. ANS: 2100m.
Find the singular matrix.
Which of the number series has highest standard deviation?
Match the following.
Some alphabet series were given and asked to find number of occurrences satisfying given condition.
Critical Reasoning.
8 questions were on one passage "7 politicians attending a party. They are seated in some way". 4 questions were on the passage "Red and Brown group in a community and conditions for their marriage". Almost all of those who answer at least one passage may be called for 2nd round.
Technical + HR Round
Out of 41 they asked 11 of us to remain for this round and others were told to come the next day. We were 8 from CSE, 2 from EEE and 1 from ISE. Others were from other branches including ISE. I was called after 6 students. Everyone was having tension but I used to tell them be free. When my name was called, I also got tensed.
I got in, Mr. Ramanujam, HR personnel, welcomed me. He was very friendly and so I got relaxed. The questions were like this.
How do you feel about the test?
I said " It is good. But I think you should make the aptitude test little hard". He said " See Mr. Narayan, now itself only 41 cleared the test. If we make the test still harder then only 10 may cross and we have to go back with 6 or 7. We can’t do this because ours is a big company and we have a large requirements. Any way good, good".
Tell me about you, your family.
What are your strength and weaknesses?
He explained me the problem I may encounter with my weakness.
So what steps are you taking to overcome that?
So you are the branch 3rd topper last year. Very good.
Which is your favorite subject?
What is the difference between Malloc and Calloc?
What are different types of DBMS?
Till then this question was asked to everyone. All said only two: Relational and Hierarchical. I said: "In the early days they were using Hierarchical and Network DBMS".
What about them now?
I answered "They are still used but nowadays, Relational, Object, and Object-Relational DBMS are widely used"
Very good. What are the stages in SE?
Where do you want to work?
If you get selected for TCS, what you want to be in next 5 years?
They said they may conduct GD depending upon number of students passing online test.
The test had 3 sections. Verbal ability in which 10 questions were synonyms, 10 were Antonyms, 5 questions for Passage and 5 sentence completion. The time for this was 20 minutes. I knew answer for only one questions in this. Aptitude session appeared immediately after 20 minutes. This session had 35 questions, almost all questions were from previous tests conducted in Ranchi, Coimbatore… The questions were fully basic. I have practiced R.S. Agarval book much but didn’t get any questions from it. This session was for 30 minutes. The third session was Critical Reasoning in which two questions, each contained 8 and 4 questions, respectively. I was unable to answer first question, but second was easy.
Those who were selected for 2nd round had all got Psychometric session after the Critical Reasoning, but the officers said not to answer the questions. Those who didn’t get Psychometric session were not called. I think who scored well only got that.
Their target was to select 50 but 41 crossed 1st round. So they combined Technical and HR rounds. On 1st day only 11 students were interviewed. The rest were said to come on the next day.
VERBAL SESSION:
All questions were from Barron’s GRE book. One of my friend remembered 800 words but got none of them. So I suggest to remember words based on Prefix, Root and Suffix method.
APTITUDE SESSION:
Bit operation…
A: 10011010
B: 11011011
C: 01011010
Find (AUB)nC
Find the odd one out: Three were DBMSs and one was OS
Find the odd one out: I can’t recall the question.
5 questions were based on Data Interpretation. The question was something related to number of members in a club in 5 successive years. One of the questions was to calculate %age rise in members between three years. Better refer Data Interpretation part in R.S. Agarwal book.
What is the largest prime number stored in 6 bits.
Convert some number in Hexadecimal to Decimal
Given g(0)=1, g(1)=-1 and g(n)=g(n-1)+g(n-2), find g(6).
Question based on coding a word.
5, 8, 14, x, 35, 50… Find x. Answer: 23
Question base on program size and memory occupied. Find %age change when size of program is changed.
In Chennai, temperature at noon varies by (T^2)/6 + 12T + 12 where T is the time elapsed from noon. Find %age change in temperature between 3PM and 6PM
A 2D array is declared as A[9, 7], each element occupies 4 bytes. The array starts at the location 3000. Find the location of A[8, 5]
Three questions based on Venn diagram, related to Football, Tennis and Cricket players.
Recognize equation of a given curve.
What is the number of Vertices, Edges and Faces of a cube.
Question related to work and time.
Find the value of M(363, 5)+R(3.4)+T(7.8)-R(3.8) where M is modulus, R is round-off, T is truncate. Answer: 9
Question related to data transmission time.
Which are orthogonal pairs?
If A, B, C are the mechanisms used to reduce fuel consumption rate by 25%, 20% and 10% respectively. Find the total fuel economy if they were used individually.
Set of values for X, Y were given and asked to find the equation.
# represents double and $ represents change in sign. Find the value of some expression
Which is the power of 4? 1024, 4048. … Answer: 4048 (All options were divisible by 4 but only 4048 is a power of 4)
Question on flight takes off at some place given by the latitude and longitude at 1AM and lands on some other location after 13 hours. Find the time at destination.
A power unit is there by the bank of the river of 900 meters width. A cable is made from power unit to Power a plant opposite to that of the river and 3000mts away from the power unit. The cost of the cable below water is Rs.15/- per meter and cost of cable on the bank is Rs.5/- per meter. Find the length where the cable is to be cut. ANS: 2100m.
Find the singular matrix.
Which of the number series has highest standard deviation?
Match the following.
Some alphabet series were given and asked to find number of occurrences satisfying given condition.
Critical Reasoning.
8 questions were on one passage "7 politicians attending a party. They are seated in some way". 4 questions were on the passage "Red and Brown group in a community and conditions for their marriage". Almost all of those who answer at least one passage may be called for 2nd round.
Technical + HR Round
Out of 41 they asked 11 of us to remain for this round and others were told to come the next day. We were 8 from CSE, 2 from EEE and 1 from ISE. Others were from other branches including ISE. I was called after 6 students. Everyone was having tension but I used to tell them be free. When my name was called, I also got tensed.
I got in, Mr. Ramanujam, HR personnel, welcomed me. He was very friendly and so I got relaxed. The questions were like this.
How do you feel about the test?
I said " It is good. But I think you should make the aptitude test little hard". He said " See Mr. Narayan, now itself only 41 cleared the test. If we make the test still harder then only 10 may cross and we have to go back with 6 or 7. We can’t do this because ours is a big company and we have a large requirements. Any way good, good".
Tell me about you, your family.
What are your strength and weaknesses?
He explained me the problem I may encounter with my weakness.
So what steps are you taking to overcome that?
So you are the branch 3rd topper last year. Very good.
Which is your favorite subject?
What is the difference between Malloc and Calloc?
What are different types of DBMS?
Till then this question was asked to everyone. All said only two: Relational and Hierarchical. I said: "In the early days they were using Hierarchical and Network DBMS".
What about them now?
I answered "They are still used but nowadays, Relational, Object, and Object-Relational DBMS are widely used"
Very good. What are the stages in SE?
Where do you want to work?
If you get selected for TCS, what you want to be in next 5 years?
T.C.S. PAPER ON 15TH JANUARY AT UIT - RGPV (GEC) BHOPAL
Complete tcs selection procedure consists of :
1)Online test
2)Technical interview
3)H.R. or M.R. round
Online test
Online test consisted of 3 sections verbal, quantitative and critical reasoning.
Total time duration was 90 minutes.
1.Verbal - 30 questions 20 minutes.
2.Quantitative - 32 questions 40 minutes
3.Critical reasoning - 3 puzzles with 4 questions each for 30 minutes.
1.Verbal consisted of 10 synonyms, 10 antonyms, 5 sentence completion, and a reading comprehension with 5 questions. Synonyms and antonyms were quite difficult, but sentence completion and reading comprehension was easy to get through if u carefully analyze and answer. It is good to be thorough with 400 high frequency words.
2.Quant section was simple enough. All the previous year questions are repeated. The following questions are some sample questions that I solved in the test.
1) Complete the series 7, 9 , 13 , __ , 27, 37
ANS: 19
2) What is the largest prime number that can be stored in an 8-bit memory?
ANS:127
3) Number of faces, vertices and edges of a cube
ANS:6,8,12
4) In a triangle which one is not possible. Sides are (5 ,5 ,5.), (5 ,4 ,5 ), (4 ,4, 9 ), (3,4 ,5,)?
ANS: (4,4,9) (HINT : for a triangle sum of smaller 2 sides should be greater than the other one which is larger)
5) Match the following:
1. Male - Boy a. A type of
2. Square - Polygon b. A part of
3. Roof - Building c. Not a type of
4. Mushroom - Vegetables d. A superset of
ANS: 1- d, 2- a, 3- b, 4- c
6) Given $ means Tripling and % means change of sign then find the value of $%$6-%$%6 ?
ANS : -72
7) My flight takes of at 2am from a place at 18N 10E and landed 10 Hrs later at a place with coordinates 36N 70W. What is the local time when my plane landed.
a) 6:00 am b) 6:40am c) 7:40am d) 7:00pm e) 8:00 am
(Hint : Every 1 deg longitude change is equal to 4 minutes . If going from west to east add time else subtract time & there is no change for north to south)
ANS: (e) 8:00am
8) In a two-dimensional array, X (9, 7), with each element occupying 4 bytes of memory, with the address of the first element X (1, 1) is 3000, find the address of X (8, 5).
ANS: 3212
9) Select the odd one out. a. Java b. Lisp c. Smalltalk d. Eiffel.
ANS: LISP
10) In which of the system, decimal number 194 is equal to 1234?
ANS: 5
11) A power unit is there by the bank of the river of 750 meters width. A cable is made from power unit to power a plant opposite to that of the river and 1500mts away from the power unit. The cost of the cable below water is Rs. 15/- per meter and cost of cable on the bank is Rs.12/- per meter. Find the total of laying the cable.
ANS:20250
12) Which of the following are orthogonal pairs?
a. 3i+2j b. i+j c. 2i-3j d. -7i+j
ANS: (A) & (C).
13) If VXUPLVH is written as SURMISE, what is SHDVD?
ANS: PEASA
14) If A, B and C are the mechanisms used separately to reduce the wastage of fuel by 30%, 20% and 10%. What will be the fuel economy if they were used combined?
ANS: 20%
15) A can copy 50 papers in 10 hours while both A & B can copy 70 papers in 10 hours. Then for how many hours required for B to copy 26 papers?
ANS: 13
16) Find the singularity matrix from a given set of matrices? (Hint determinant(A)=0)
17) units of basic quantities :
like (energy * time * time)/(mass * dist) = distance
18) For a round trip, a car used 4 1/2 gallons of gasoline. If it used 1/4 more gasoline going than coming back, how much gasoline was used coming back?
Ans: 2 gallons
19) A shopkeeper bought a watch for Rs.400 and sold it for Rs.500.What is his profit percentage?
Ans. 25%
20)g[0]=1,g[1]=-1,g[n]=2*g[n-1]-3*g[n-2] then calculate g[4]=
21) .The ratio of boys to girls is 6:4.60% of the boys and 40% of girls take lunch in the canteen.What % of class takes lunch? Ans) 52%
22) Which of the following set of numbers has the highest Standard deviation?
a)1,0,1,0,1,0 b) -1, -1, -1, -1, -1, -1
c)1,1,1,1,1,1 d) -1,1,-1, 1,-1, 1
ANS: D
23) units of basic quantities (momentum * velocity)/(force * time) = velocity
24-27) there were 3 questions on venn diagrams (like 20 spek eng,30 speak hindi 3 speak both and so on..)
28-32)5 questions based on 1 piechart (data interpretation).
CRITICAL REASONING: ( 3 puzzles with 4 questions each)
1) Some seating arrangement problem like there were 6 people A, B, C, D, E, F sitting in a table they all are agricultural minister, health minister, education minister and so on. The hints proceed like this. 1) A sits 2 seats away from D. 2) agricultural minister cannot sit near health minister. And some 3 more hints (I don,t remember) using the hints given in the question U have to trace out their seating position in a round table and have to answer 5 questions based on it.
2) all P,s are Q,s, some R,s are Q,s , all P,s are E,s...so on. With these hints u can draw a venn digram and answer the following 5 questions. All the questions are from GRE Barron model papers (12 th ,13 th edition) so just solve all those. (Just mug up the answers.)
3) barons gre 12 edition page 496
Ashland is north of east liverpool
TECHNICAL INTERVIEW:
SIR: Have seat
ME: thank you very much sir
SIR: Tell me about yourself.
Me: I said my name, my college name, my degree, about my family and my hobbies, some of my positive qualities, my role model.
Sir: What are your core subjects that u have learnt so far?
Me: I am an EC student I said all my core subjects.
Sir: What are the different types of Topologies?, what are merits &demerits of each?
Me: Mesh topology, star topology, Tree topology, Bus topology, mesh topology.
Sir: what is the Topology used in ur college?
Me: I said it is star topology.
Sir: Implement bubble sort in c using pointers?
Me: I made it.
Sir: what are header & circular link list?
Me: I explained with an example.
Sir: what are different data structures & how & where do we use them?
Me: I explained
Sir: what are operational amplifier ( inverting , non inverting , summer, integrator, differentiator)?
Me: I explained.
Sir: what are flip flops & logic gates?( they can tell any function to implement )
Me: I explained .
HR ROUND :
Sir: Why TCS?
Me: TCS gives Experience certainty, I came to know that it has a good work environment and the employees get a good respect. It has various initial and continuous learning programs which will help me a lot in learning new skills and updating myself with latest technologies hence I prefer TCS.
Sir: DHEERAJ you are from Bhopal can u tell the history of Bhopal?
Me: I told.
Sir: Tell me about famous Bhopal Gas tragedy?
Me: I told.
Sir: Tell me about famous historical temples, about kings, dates etc ?
Me: I told.
Sir: Do u have anything to ask us?
Me: I have 1 more year to complete my course what do u expect me to do in this 1 year to fit in to your organization?
Some puzzles were also asked like
1. two coins of same radius with 1 coin fixed & other turn around it , how much the other would turn when it takes a complete one revolution?
2. you are in a room of l,b,h=10,10,10 & in the centre is a monkey trying to pluck bananas in the centre of ceiling but he is unable to do it what shud he do to pluck them?
3. What is the height of room if after entering the room with a watch ur head
strikes a hanging bulb?
Ans: Oscillate the hanging bulb. Calculate the time period for one complete
oscillation by Simple Harmonic Motion (SHM) of the handing bulb. Put it in the
formula T=2 * 3.14 * (L/G)^1/2
L will be the length of the hanging thread.
Add the L with ur height to get the height of the room.
4. You have to draw 3 concentric circles with a line passing thru their center
without lifting hand.
Ans: Start the line complete one circle move inside circles along the line and then
draw second circle. Like wise rest.
I was almost sure that I will get placed and as expected I got selected. Out of 121 who attended the interview 49 got placed.
Speak very polite and be confident in the interview. Don,t try answering the question that you really don,t know. Be very careful with the resumes keep it as simple as you can .
Three suggestions from my side for an interview
1 don,t bluff
2 for God,s sake don,t bluff
3 for your own sake don,t bluff
1)Online test
2)Technical interview
3)H.R. or M.R. round
Online test
Online test consisted of 3 sections verbal, quantitative and critical reasoning.
Total time duration was 90 minutes.
1.Verbal - 30 questions 20 minutes.
2.Quantitative - 32 questions 40 minutes
3.Critical reasoning - 3 puzzles with 4 questions each for 30 minutes.
1.Verbal consisted of 10 synonyms, 10 antonyms, 5 sentence completion, and a reading comprehension with 5 questions. Synonyms and antonyms were quite difficult, but sentence completion and reading comprehension was easy to get through if u carefully analyze and answer. It is good to be thorough with 400 high frequency words.
2.Quant section was simple enough. All the previous year questions are repeated. The following questions are some sample questions that I solved in the test.
1) Complete the series 7, 9 , 13 , __ , 27, 37
ANS: 19
2) What is the largest prime number that can be stored in an 8-bit memory?
ANS:127
3) Number of faces, vertices and edges of a cube
ANS:6,8,12
4) In a triangle which one is not possible. Sides are (5 ,5 ,5.), (5 ,4 ,5 ), (4 ,4, 9 ), (3,4 ,5,)?
ANS: (4,4,9) (HINT : for a triangle sum of smaller 2 sides should be greater than the other one which is larger)
5) Match the following:
1. Male - Boy a. A type of
2. Square - Polygon b. A part of
3. Roof - Building c. Not a type of
4. Mushroom - Vegetables d. A superset of
ANS: 1- d, 2- a, 3- b, 4- c
6) Given $ means Tripling and % means change of sign then find the value of $%$6-%$%6 ?
ANS : -72
7) My flight takes of at 2am from a place at 18N 10E and landed 10 Hrs later at a place with coordinates 36N 70W. What is the local time when my plane landed.
a) 6:00 am b) 6:40am c) 7:40am d) 7:00pm e) 8:00 am
(Hint : Every 1 deg longitude change is equal to 4 minutes . If going from west to east add time else subtract time & there is no change for north to south)
ANS: (e) 8:00am
8) In a two-dimensional array, X (9, 7), with each element occupying 4 bytes of memory, with the address of the first element X (1, 1) is 3000, find the address of X (8, 5).
ANS: 3212
9) Select the odd one out. a. Java b. Lisp c. Smalltalk d. Eiffel.
ANS: LISP
10) In which of the system, decimal number 194 is equal to 1234?
ANS: 5
11) A power unit is there by the bank of the river of 750 meters width. A cable is made from power unit to power a plant opposite to that of the river and 1500mts away from the power unit. The cost of the cable below water is Rs. 15/- per meter and cost of cable on the bank is Rs.12/- per meter. Find the total of laying the cable.
ANS:20250
12) Which of the following are orthogonal pairs?
a. 3i+2j b. i+j c. 2i-3j d. -7i+j
ANS: (A) & (C).
13) If VXUPLVH is written as SURMISE, what is SHDVD?
ANS: PEASA
14) If A, B and C are the mechanisms used separately to reduce the wastage of fuel by 30%, 20% and 10%. What will be the fuel economy if they were used combined?
ANS: 20%
15) A can copy 50 papers in 10 hours while both A & B can copy 70 papers in 10 hours. Then for how many hours required for B to copy 26 papers?
ANS: 13
16) Find the singularity matrix from a given set of matrices? (Hint determinant(A)=0)
17) units of basic quantities :
like (energy * time * time)/(mass * dist) = distance
18) For a round trip, a car used 4 1/2 gallons of gasoline. If it used 1/4 more gasoline going than coming back, how much gasoline was used coming back?
Ans: 2 gallons
19) A shopkeeper bought a watch for Rs.400 and sold it for Rs.500.What is his profit percentage?
Ans. 25%
20)g[0]=1,g[1]=-1,g[n]=2*g[n-1]-3*g[n-2] then calculate g[4]=
21) .The ratio of boys to girls is 6:4.60% of the boys and 40% of girls take lunch in the canteen.What % of class takes lunch? Ans) 52%
22) Which of the following set of numbers has the highest Standard deviation?
a)1,0,1,0,1,0 b) -1, -1, -1, -1, -1, -1
c)1,1,1,1,1,1 d) -1,1,-1, 1,-1, 1
ANS: D
23) units of basic quantities (momentum * velocity)/(force * time) = velocity
24-27) there were 3 questions on venn diagrams (like 20 spek eng,30 speak hindi 3 speak both and so on..)
28-32)5 questions based on 1 piechart (data interpretation).
CRITICAL REASONING: ( 3 puzzles with 4 questions each)
1) Some seating arrangement problem like there were 6 people A, B, C, D, E, F sitting in a table they all are agricultural minister, health minister, education minister and so on. The hints proceed like this. 1) A sits 2 seats away from D. 2) agricultural minister cannot sit near health minister. And some 3 more hints (I don,t remember) using the hints given in the question U have to trace out their seating position in a round table and have to answer 5 questions based on it.
2) all P,s are Q,s, some R,s are Q,s , all P,s are E,s...so on. With these hints u can draw a venn digram and answer the following 5 questions. All the questions are from GRE Barron model papers (12 th ,13 th edition) so just solve all those. (Just mug up the answers.)
3) barons gre 12 edition page 496
Ashland is north of east liverpool
TECHNICAL INTERVIEW:
SIR: Have seat
ME: thank you very much sir
SIR: Tell me about yourself.
Me: I said my name, my college name, my degree, about my family and my hobbies, some of my positive qualities, my role model.
Sir: What are your core subjects that u have learnt so far?
Me: I am an EC student I said all my core subjects.
Sir: What are the different types of Topologies?, what are merits &demerits of each?
Me: Mesh topology, star topology, Tree topology, Bus topology, mesh topology.
Sir: what is the Topology used in ur college?
Me: I said it is star topology.
Sir: Implement bubble sort in c using pointers?
Me: I made it.
Sir: what are header & circular link list?
Me: I explained with an example.
Sir: what are different data structures & how & where do we use them?
Me: I explained
Sir: what are operational amplifier ( inverting , non inverting , summer, integrator, differentiator)?
Me: I explained.
Sir: what are flip flops & logic gates?( they can tell any function to implement )
Me: I explained .
HR ROUND :
Sir: Why TCS?
Me: TCS gives Experience certainty, I came to know that it has a good work environment and the employees get a good respect. It has various initial and continuous learning programs which will help me a lot in learning new skills and updating myself with latest technologies hence I prefer TCS.
Sir: DHEERAJ you are from Bhopal can u tell the history of Bhopal?
Me: I told.
Sir: Tell me about famous Bhopal Gas tragedy?
Me: I told.
Sir: Tell me about famous historical temples, about kings, dates etc ?
Me: I told.
Sir: Do u have anything to ask us?
Me: I have 1 more year to complete my course what do u expect me to do in this 1 year to fit in to your organization?
Some puzzles were also asked like
1. two coins of same radius with 1 coin fixed & other turn around it , how much the other would turn when it takes a complete one revolution?
2. you are in a room of l,b,h=10,10,10 & in the centre is a monkey trying to pluck bananas in the centre of ceiling but he is unable to do it what shud he do to pluck them?
3. What is the height of room if after entering the room with a watch ur head
strikes a hanging bulb?
Ans: Oscillate the hanging bulb. Calculate the time period for one complete
oscillation by Simple Harmonic Motion (SHM) of the handing bulb. Put it in the
formula T=2 * 3.14 * (L/G)^1/2
L will be the length of the hanging thread.
Add the L with ur height to get the height of the room.
4. You have to draw 3 concentric circles with a line passing thru their center
without lifting hand.
Ans: Start the line complete one circle move inside circles along the line and then
draw second circle. Like wise rest.
I was almost sure that I will get placed and as expected I got selected. Out of 121 who attended the interview 49 got placed.
Speak very polite and be confident in the interview. Don,t try answering the question that you really don,t know. Be very careful with the resumes keep it as simple as you can .
Three suggestions from my side for an interview
1 don,t bluff
2 for God,s sake don,t bluff
3 for your own sake don,t bluff
Proforma for creating CV For campus (Part one )
Proforma for creating CV For campus (Part Two)
Sample Electrical Engineer (Product Development) Resume
Ram LaL,
19,lodhi ghat,
abc , India,
91-9000099000.
SUMMARY
Good experience in new and leading product development programs for the OEM, commercial, government markets. Capable of managing vendors, satisfying the needs of customer and solving their problems by proper communication. Can administrate the development and research programs efficiently.
PROFESSIONAL EXPERIENCE
1988-Present Riotronics Company , Austin, TX
Senior Design Engineer
In Directly Observed Therapy programs, designed the entire architecture for the patients and workers.
It included the design and prototype; plastic setup and electrical manufacturing of 250 uboxes for the trial of TB in India.
1984-88 Morganite Inc., Salem, OR
Design Engineer
Data analization using predictive techniques, filtering and feature selection.
Coded real time motor-control, designed sensors electocorticography experiments in VRML, Matlab and Simulator.
1980 -84 Pulse Engineering Inc, Honolulu, HI
Electrical Engineer
included the management hardware for pressure, strain, EMG, battery using the Embedded Stack.
Coded the techniques for the gait identification and correction for robotic devices in Matlab and C++.
design of the hardware and software of Inertial Measurement Unit for orientation and detection of limb.
EDUCATION
Nevada University, Santa Fe, NM
Bachelor of Science, Electrical Engineering, 1980
Seminars
Biomass Fuelled Power Plant
Modeling of Transformers with Internal Incipient Faults
Voltage Sag Analysis
19,lodhi ghat,
abc , India,
91-9000099000.
SUMMARY
Good experience in new and leading product development programs for the OEM, commercial, government markets. Capable of managing vendors, satisfying the needs of customer and solving their problems by proper communication. Can administrate the development and research programs efficiently.
PROFESSIONAL EXPERIENCE
1988-Present Riotronics Company , Austin, TX
Senior Design Engineer
In Directly Observed Therapy programs, designed the entire architecture for the patients and workers.
It included the design and prototype; plastic setup and electrical manufacturing of 250 uboxes for the trial of TB in India.
1984-88 Morganite Inc., Salem, OR
Design Engineer
Data analization using predictive techniques, filtering and feature selection.
Coded real time motor-control, designed sensors electocorticography experiments in VRML, Matlab and Simulator.
1980 -84 Pulse Engineering Inc, Honolulu, HI
Electrical Engineer
included the management hardware for pressure, strain, EMG, battery using the Embedded Stack.
Coded the techniques for the gait identification and correction for robotic devices in Matlab and C++.
design of the hardware and software of Inertial Measurement Unit for orientation and detection of limb.
EDUCATION
Nevada University, Santa Fe, NM
Bachelor of Science, Electrical Engineering, 1980
Seminars
Biomass Fuelled Power Plant
Modeling of Transformers with Internal Incipient Faults
Voltage Sag Analysis
Sample Professional Engineering Resume
Ram LaL,
19,lodhi ghat,
abc , India,
91-9000099000.
Objective: Seeking for the dynamic and challenging position of professional engineer where I can help lead engineer to meet project requirements.
Computer Skills: Proficient with
Windows
PowerPoint
Excel
Word
Lexis-Nexis
Westlaw
Lotus
AutoCAD
Previous Work Experience:
White Field, New York
Worked as Design Engineer
Responsibilities:
Responsible for providing engineering support through out the whole manufacturing process and make sure that the components are renovated properly and correctly.
Done designing of new modified products.
Provide support to on-site activities to make sure that the machines are returned to service very safely, correctly and reliably.
Responsible for maintaining engineering record.
Responsible for solving customer's problems and giving satisfied information about products.
Support in designing for improvement and to get benefit of the customers.
Responsible for various other duties as needed.
Some professional Engineering Industry
Worked as Staff Engineer
Responsibilities:
Work as the in charge of designing and carry out tests of laboratory to determine physical properties of material.
Responsible for assigning tasks and developing proposals for laboratory technicians.
Work together with clients, suppliers, vendors to determine issues.
Responsible for making $40,000 by setting excellent relationships with clients.
Teamed with leading offices of organizations to develop research proposals.
Done other duties as needed.
Education:
MS in Mechanical Engineering, New York University, NY
Reference:
Mr. Shyam Lal,
21 Jawahar nagar,Bhopal,
MP.
19,lodhi ghat,
abc , India,
91-9000099000.
Objective: Seeking for the dynamic and challenging position of professional engineer where I can help lead engineer to meet project requirements.
Computer Skills: Proficient with
Windows
PowerPoint
Excel
Word
Lexis-Nexis
Westlaw
Lotus
AutoCAD
Previous Work Experience:
White Field, New York
Worked as Design Engineer
Responsibilities:
Responsible for providing engineering support through out the whole manufacturing process and make sure that the components are renovated properly and correctly.
Done designing of new modified products.
Provide support to on-site activities to make sure that the machines are returned to service very safely, correctly and reliably.
Responsible for maintaining engineering record.
Responsible for solving customer's problems and giving satisfied information about products.
Support in designing for improvement and to get benefit of the customers.
Responsible for various other duties as needed.
Some professional Engineering Industry
Worked as Staff Engineer
Responsibilities:
Work as the in charge of designing and carry out tests of laboratory to determine physical properties of material.
Responsible for assigning tasks and developing proposals for laboratory technicians.
Work together with clients, suppliers, vendors to determine issues.
Responsible for making $40,000 by setting excellent relationships with clients.
Teamed with leading offices of organizations to develop research proposals.
Done other duties as needed.
Education:
MS in Mechanical Engineering, New York University, NY
Reference:
Mr. Shyam Lal,
21 Jawahar nagar,Bhopal,
MP.
sample civil engineer resume
S L Gupta
123,Ram Nagar
Bhopal , MP
999999999999
WORK EXPERIENCE
2003-Present Gulf Fertilizer and Chemical Corp., Jackson, MS
Specialist in the Structural Department
The base idea of the project was the township with features of international standards. The exact work involved was grading of site, drainage and sewage system,sewage treatment, roads, water supply, water treatment and its storage plant, telecommunication, electrical distribution.
1994-2003 Gas Power Corp., Jefferson City, MO
Assistant Manager
This project involved the entire structural and civil works along with 180MW CC power plant along with the basic foundations for turbine foundation, Transformer foundation, bypass stack and main stack foundation; and also the construction of bulidings for main control room, gas booster building, water pump house, workshop building; pipeline for the waste water, circulation water pipeline.
1987-1994 Ordinance Factory,Bhopal , MP
As an Engineer
In this proect, all the construction was adhered to CCOE regulations. It involved the process and non process buildings having the blast proof structures which require earthen dykes, RCC walls, nodes. It also included automatic and fire proof doors in the case of any emergengy conditions. The foundations for the vibratoty and the static equipments were also made.
EDUCATION
Rose University,Rose Vally, RI
Bachelor of Science, Civil Engineering, 1986
123,Ram Nagar
Bhopal , MP
999999999999
WORK EXPERIENCE
2003-Present Gulf Fertilizer and Chemical Corp., Jackson, MS
Specialist in the Structural Department
The base idea of the project was the township with features of international standards. The exact work involved was grading of site, drainage and sewage system,sewage treatment, roads, water supply, water treatment and its storage plant, telecommunication, electrical distribution.
1994-2003 Gas Power Corp., Jefferson City, MO
Assistant Manager
This project involved the entire structural and civil works along with 180MW CC power plant along with the basic foundations for turbine foundation, Transformer foundation, bypass stack and main stack foundation; and also the construction of bulidings for main control room, gas booster building, water pump house, workshop building; pipeline for the waste water, circulation water pipeline.
1987-1994 Ordinance Factory,Bhopal , MP
As an Engineer
In this proect, all the construction was adhered to CCOE regulations. It involved the process and non process buildings having the blast proof structures which require earthen dykes, RCC walls, nodes. It also included automatic and fire proof doors in the case of any emergengy conditions. The foundations for the vibratoty and the static equipments were also made.
EDUCATION
Rose University,Rose Vally, RI
Bachelor of Science, Civil Engineering, 1986
Network Engineer Resume Tips
A network engineer's resume should clearly show his/her technical skills. To achieve this, add Technical Summary or Technical Expertise section to the resume. Further break this section into subcategories to mention knowledge of programs and applications.
Fortunately, network engineer's resume has a very simple format. The key to writing an effective resume is to keep in mind the prospective hiring manager or human resources recruiter.
Keep it focused
Keep a strong focus on your goals in the field of engineering, incorporating parts of your background to illustrate them. A statement of your goals is one of the clearest indicators of your eligibility to a prospective employer.
For example, include the following that is applicable to you
Technical certifications
Hardware
Operating systems
Networking/protocols
Programming/languages
Web applications
Database applications
Highlight some of your soft skills in Career Summary section to add a personality to your. Remember your resume should be short enough, yet should be able to effectively showcase your achievements. Do not make it excessively lengthy.
Technical/computer or other qualification in a network engineer's resume should consist of course content in brief, including the duration, the institute and also the result. This section could also consist of the projects done including platform used (Front-end and Backend) which add a value to the resume. Also mention other certifications like personality development, marketing diploma or in general research or studies associated with networking.
Highlight your Achievements
Show how your performance favoured the company's good. Highlight your initiatives and performances that resulted in enhanced efficiency, faster work, monetary savings etc. Focus on your most impressive technical project/achievement.
Keywords
The keywords for any network engineer's resume depend on the job-target and experience. Specific programs and applications are often used as keywords in case of a technical resume.
Remember :
Always format your experience in reversed chronological order, your experience from your most recent job to the earlier jobs.
Avoid elementary information like hobbies and interests. Instead, strengths or skills could be described to give a corporate look to your resume.
Fortunately, network engineer's resume has a very simple format. The key to writing an effective resume is to keep in mind the prospective hiring manager or human resources recruiter.
Keep it focused
Keep a strong focus on your goals in the field of engineering, incorporating parts of your background to illustrate them. A statement of your goals is one of the clearest indicators of your eligibility to a prospective employer.
For example, include the following that is applicable to you
Technical certifications
Hardware
Operating systems
Networking/protocols
Programming/languages
Web applications
Database applications
Highlight some of your soft skills in Career Summary section to add a personality to your. Remember your resume should be short enough, yet should be able to effectively showcase your achievements. Do not make it excessively lengthy.
Technical/computer or other qualification in a network engineer's resume should consist of course content in brief, including the duration, the institute and also the result. This section could also consist of the projects done including platform used (Front-end and Backend) which add a value to the resume. Also mention other certifications like personality development, marketing diploma or in general research or studies associated with networking.
Highlight your Achievements
Show how your performance favoured the company's good. Highlight your initiatives and performances that resulted in enhanced efficiency, faster work, monetary savings etc. Focus on your most impressive technical project/achievement.
Keywords
The keywords for any network engineer's resume depend on the job-target and experience. Specific programs and applications are often used as keywords in case of a technical resume.
Remember :
Always format your experience in reversed chronological order, your experience from your most recent job to the earlier jobs.
Avoid elementary information like hobbies and interests. Instead, strengths or skills could be described to give a corporate look to your resume.
Engineering Resume Tips
An engineering resume should clearly show a candidate's technical skills. To achieve this, add the Technical Summary or Technical Expertise section to your resume. Further break this section into subcategories for a quick scan of your knowledge of programs and applications.
Fortunately, engineering resumes have a very simple format. The key to writing an effective resume is to keep in mind the prospective hiring manager or human resources recruiter.
Keep it focused
Keep a strong focus on your goals in the field of engineering, incorporating parts of your background to illustrate them. A statement of your goals is one of the clearest indicators to a prospective employer of your worth to the company.
For example include the following that is applicable to you:
technical certifications
hardware
operating systems
networking/protocols
programming languages
Web applications
database applications
Highlight some of your soft skills in the 'career summary' section to add a better look to your engineering resume. Remember your resume should be short enough, yet should be able to effectively showcase your achievements. Do not make it excessively lengthy.
Technical/computer or other qualification in should include the course content in brief, the duration, the institute and also the result. This domain could also consist of the projects done including platform used (Front-end and Backend). To add more value, mention qualifications like personality development, marketing diploma or in general research or studies that are associated with engineering.
Highlight of your Accomplishments
Show how your performance resulted in company's good. Highlight your initiatives and performances that resulted in enhanced efficiency, faster work, monetary savings etc. Focus on your most impressive technical projects and achievements.
Keywords
The keywords for any engineering resume depends on your job target and experience. Specific programs and applications are often used as keywords in case of a technical resume.
Remember :
Always list your experience starting with the most recent job first, followed by others in a reversed chronological order.
Avoid elementary information like hobbies and interests. Instead, strengths or skills could be furnished to give a corporate image to the resume.
Fortunately, engineering resumes have a very simple format. The key to writing an effective resume is to keep in mind the prospective hiring manager or human resources recruiter.
Keep it focused
Keep a strong focus on your goals in the field of engineering, incorporating parts of your background to illustrate them. A statement of your goals is one of the clearest indicators to a prospective employer of your worth to the company.
For example include the following that is applicable to you:
technical certifications
hardware
operating systems
networking/protocols
programming languages
Web applications
database applications
Highlight some of your soft skills in the 'career summary' section to add a better look to your engineering resume. Remember your resume should be short enough, yet should be able to effectively showcase your achievements. Do not make it excessively lengthy.
Technical/computer or other qualification in should include the course content in brief, the duration, the institute and also the result. This domain could also consist of the projects done including platform used (Front-end and Backend). To add more value, mention qualifications like personality development, marketing diploma or in general research or studies that are associated with engineering.
Highlight of your Accomplishments
Show how your performance resulted in company's good. Highlight your initiatives and performances that resulted in enhanced efficiency, faster work, monetary savings etc. Focus on your most impressive technical projects and achievements.
Keywords
The keywords for any engineering resume depends on your job target and experience. Specific programs and applications are often used as keywords in case of a technical resume.
Remember :
Always list your experience starting with the most recent job first, followed by others in a reversed chronological order.
Avoid elementary information like hobbies and interests. Instead, strengths or skills could be furnished to give a corporate image to the resume.
Subscribe to:
Posts (Atom)